Filter
Top Products
126
E
Additional
Information
• The speaker has been turned off with
the selector dial ( 30).
• Headphones are being used.
? There’s no sound coming from the
speaker during playback.
Memory card operations
Cause and/or what to do about it
• It is not turned the right way ( 93).
Turn it the right way and try inserting
again.
• Turn the camcorder’s power off and
back on again and remove and
reinsert the card if necessary.
• The camcorder is not set to CARD
CAMERA or CARD PLAY (VCR)
mode ( 96, 100).
• The memory card is not inserted
( 93).
• You are using an SD Memory Card
and it is set for erasure prevention.
Change the position of the protect
switch.
• The memory card is full. Erase
images ( 103) or insert a new
memory card.
• The power source is not properly
connected ( 12), or the battery
pack is exhausted or not properly
attached ( 13, 118).
• The function cannot be used in that
recording program ( 54).
• The memory card is not loaded
( 93).
• You are using an SD Memory Card and
it is set for erasure prevention. Change
the position of the protect switch.
• The memory card is full. Erase
images ( 103) or insert a new
memory card.
• You have reached the maximum file
number. Set the file numbering to
RESET through the menu ( 95)
and insert a new memory card.
• You are using an unformatted
memory card. Format the card
( 111).
Problem
? The memory card will not insert.
? The mark flashes red in the
display even though a memory
card has been inserted.
? Nothing happens when I press the
buttons.
? The PHOTO button doesn’t work.