52
E
Using the Full
Range of Features
MENUMENU
The clear buttons above the LCD panel light up when the camcorder’s power is
on, or only when one of the buttons is pressed, making it possible to play back
cassettes when in dark surroundings. You can also change the color in which they
light up to green, orange, blue, yellow, turquoise (greenish blue) or purple.
To change the color, open the menu and select SYSTEM. Then select LIGHT
COLOR, set it to the desired color and close the menu.
Note:
• You cannot change LIGHT COLOR when BUTTONLIGHT is set to OFF.
To change the setting, open the menu and select SYSTEM. Then select
BUTTONLIGHT and set it to PUSH ON or OFF and close the menu.
• ON: The buttons remain lit in the indicated color. When one of the buttons is
pressed, all the buttons simultaneously change color. When the button is
released, they return to the original color.
• PUSH ON: Buttons light up only while one of them is pressed. All the buttons
simultaneously lights up in the indicated color. When the button is released,
they turn off again after a few seconds.
• OFF: Buttons do not light up.
Adjusting the Selectable Color Light-up Buttons
Turning the buttons off
Changing the color of the buttons
BUTTONLIGHT•ON
SYSTEM
( 40)
LIGHT COLOR•TURQUOISE
SYSTEM
( 40)
+
,
+
,
+
,
+
PLAY
(VCR)
CARD
CAMERA
CARD
PLAY
(VCR)
TAPE
CAMERA
TAPE
+
,
+
,
+
,
+
PLAY
(VCR)
CARD
CAMERA
CARD
PLAY
(VCR)
TAPE
CAMERA
TAPE