Canon ZR50 MC Camcorder User Manual


 
92
E
Editing
Connecting the camcorder to your VCR or 8 mm video camera allows conversion
of recorded analog video and audio signals to digital signals in an instant. The
digital signals can be output to the other equipment with a DV terminal. The
camcorder’s DV terminal works exclusively as an output terminal.
There may be cases where analog-digital converter cannot be done properly,
depending on the signals output from the connected equipment.
For example: Signals that include the copyright protective signal, or anomalous
signals such as ones that include ghost signals, etc.
You cannot use your headphones during digital conversion. Even if the
AV/headphone terminal is set to “PHONES” through the menu, it will
automatically be set to “AV ”, and “PHONES” will disappear from the display.
You are recommended to use power from a household wall outlet with an AC
power adapter.
Do not operate with a cassette inserted to the camcorder.
Turn off the power of all equipment before performing connections.
Refer also to the instruction manuals of the other equipment connected.
Digitally outputting analog video and audio
signals (Analog-Digital Converter)
AV
MIC
DV
S
OUTPUT
VIDEO
S(S1)-VIDEO
AUDIO
L
R
STV-250N
Stereo Video Cable
: Signal flow
Side with
arrow
Side with arrow
S-150 S-video Cable (optional)