Filter
Top Products
23
Printing
This section explains the flow of printing operations.
For more details, refer to your
Camera User Guide
.
1
Set the camera to replay mode
and turn the power on.
• Check that (Direct Print mark) is
displayed in the upper left corner of
the LCD monitor.
If does not display, check the following:
• Is the cable correctly connected? p. 22
• Is the printer’s power on? p. 22
• Is your camera’s firmware compatible with this printer? p. 29
2
Display the images to be printed and press the SET
button.
3
Select the number of images you wish to print and other
settings.
4
Select [Print] or [OK] and press the SET button.
• The camera returns to the replay screen once printing is successfully
completed.
• Do not put more than 9 sheets in the print output receptacle.
If printing doesn’t start, check the following:
• Are the camera or the printer’s batteries depleted?
We recommend that you use the compact power adapter or fully charged
batteries.
• Are your paper and ink from the same type of set?
p. 16
• Does the camera’s LCD monitor display a message? p. 31