Filter
Top Products
27
• The printer consumes the battery charge when the power is on even when a
function is not being used. To conserve the battery charge, be particularly
attentive in turning the power off.
• Although the battery pack’s maximum operating range is 5 to 40˚C (41 to
104˚F), the optimal range is 10 to 30˚C (50 to 86˚F). At cold temperatures,
such as those experienced on ski hills, performance will temporarily decline,
reducing the usable time.
• If the usable time of a battery pack diminishes substantially even when fully
charged, it should be replaced.
• Avoid dropping or subjecting the battery pack to severe impact.
• Do not apply heat or expose the battery pack to open flame.
• Immediately flush water over parts of the body or clothing that come into
contact with the inner contents of a battery if the outer casing incurs damage.
If any of these substances should contact internal tissues, such as eyes or the
mouth, immediately flush with water and seek medical assistance.
• Do not use the battery pack in products other than those recommended by
Canon.
• When the battery pack is attached to the printer, unplug the compact power
adapter.
• When the battery pack is attached to the printer, the printer will automatically
turn off if it is idle for 5 minutes or more.
• Remove the battery pack when the printer is not in use.
Battery Status
If battery status is low while the printer is connected to the camera, the camera’s
LCD monitor may display the message indicated below.
Error Message Correction
Recharge the printer battery The battery pack’s power is too low to operate the
printer.
Switch the battery pack for a fully charged one or
recharge the battery pack.
Battery Performance
Number of prints Postcard size paper:
Approximately 18 sheets
* The above data may vary according to the printing environment and the image to be printed.
* At low temperatures, the battery pack performance may diminish and the low battery icon may
appear very rapidly. In these circumstances, the performance can be improved by warming the
battery pack in a pocket before use.
Test conditions:
Room temperature (23˚C, 73˚F),
Canon images, Continuous print