Filter
Top Products
129
Menu Settings
8
Menu Settings
MENU
Review time
When “Review” is set to “On” or “On (Info),” you can set the
number of seconds the image is displayed on the LCD monitor.
(→p.53)
Noise reduction
When turned on, noise reduction can reduce noise in the
image that is prone to occur during bulb exposures.
Protect images
You can protect all the images in the selected folder or CF card
to prevent accidental erase. Or you can cancel the image
protection. Choose “Select all in folder,” “Clear all in folder,”
“Select all on CF card,” or “Clear all on CF card.” (→p.120)
Erase all on CF card
This erase all the unprotected images on the CF card.
(→p.125)
Highlight alert
When the display format has been set to (single image
with information) or single image, the overexposed highlight
areas of the image will blink on the LCD monitor when
“Highlight alert” is “On.” (→p.118)
Display AF points
When the display format has been set to (single image
with information), you can set “Display AF points” to “On” or
“Off.” (→p.118)
The active AF point will be displayed for the One-Shot AF and
the selected AF point for the AI Servo AF.
The noise reduction process will take the same amount of
time as the exposure time.