Filter
Top Products
82
Program AE
Select < > on the LCD panel.
•
While pressing the < > button, turn the < >
dial to select <
>. Then release the < >
button.
1
Focus the subject.
•
Look through the viewfinder and aim the Area AF
ellipse over the subject. Then press the shutter
button halfway.
s
The AF point which achieves focus flashes briefly.
At the same time, the green focus confirmation light
<
> in the viewfinder is displayed.
s
The exposure setting will be displayed on the LCD
panel and in the viewfinder.
•
If the focus confirmation light < > in the viewfinder
blinks, the shutter will lock and a picture cannot be
taken. See “When Autofocus Fails (Manual
Focusing)” on page 73.
2
AF point
Focus confirmation
light
Area AF ellipse
Shutter speed
Aperture
Exposure setting
Make sure the exposure setting is not
blinking, then press the shutter button
fully to take the picture.
3
AE is an abbreviation for Auto Exposure.
The Program AE mode is set automatically as the camera’s initial shooting mode.
(→p.34)