Filter
Top Products
104
Selecting the Drive Mode
Changing the Drive Mode
1. Set the program selector to .
2. Press the DRIVE MODE button to switch between the drive modes.
The setting changes with each press of the button.
Continuous Shooting/High-Speed Continuous Shooting
Press and hold the PHOTO button.
A series of still images will be recorded as long as you hold the PHOTO button.
Maximum number of continuous shots at one time:
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
The number of frames per second will be lower when “ ” (camcorder shake
warning) is displayed on the screen.
In normal and high-speed continuous shooting mode, images are captured at 2
frames/second when using the flash.
Continuous
Shooting
Captures a quick series of still images while you press the PHOTO button.
For the number of frames per second, refer to the following table.
High-Speed
Continuous Shooting
AEB (Auto
Exposure Bracketing)
The camcorder records a still image in three different exposures (dark,
normal, light in 1/2 EV steps), allowing you to choose the perfect exposed
shot.
Single Records a single still image when you press the PHOTO button.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
Still Image Size
Frames per Second
Maximum Number
of Continuous Shots
Normal speed High speed
1280 x 960 3 frames 5 frames 10 images
640 x 480 3 frames 5 frames 60 images
PHOTO button
DRIVE MODE button
Program selector