Filter
Top Products
67
Advanced Functions
Recording
E
1. Open the menu and select [D.EFFECT SETUP].
2. Select [D.E.SELECT] and set it to [MULTI-S].
3. Select [M.S.SPEED] and select the transition speed.
Following transition speeds can be selected: fast (every 4
frames), moderate (every 6 frames*), slow (every 8 frames*).
* In Low Light mode: moderate (every 8 frames), slow (every 12 frames).
4. Select [M.S.SPLIT], select the number of sequences and close the
menu.
“MULTI-S“ flashes.
5. Press the D.EFFECTS button.
• MANUAL: Images will be captured each time you press the
D.EFFECTS button. The blue frame indicating the next
sequence disappears after the last image. Pressing the
D.EFFECTS button for more than 1 second cancels the
images one after another.
• FAST, MODERATE, SLOW: The set number of images will be captured at the set
speed. To cancel the multi-image screen, press the D.EFFECTS button.
6. Press the start/stop button to begin recording.
The multi-image screen is recorded on the tape.
Turn off the digital effect when you do not use it.
The camcorder retains the setting even if you turn it off or change the program
AE mode.
The image quality may be slightly lower with digital effects.
Digital effects cannot be used in the following cases:
- When the program selector is set to EASY.
- During DV dubbing.
Faders cannot be used when Card Mix is activated.
About the multi-image screen:
The multi-image screen cannot be used in the following cases:
- In the night modes.
- When the widescreen mode is selected.
- When Card Mix is activated.
In PLAY (VCR) mode: Pressing any tape operation button (such as play or
pause), or performing date search cancels the multi-image screen.
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY