Filter
Top Products
Troubleshooting Guide
174
If you shoot continuously with the built-in flash at short intervals, the
flash might stop operating to protect the flash unit.
If the image has been erase-protected, it cannot be erased. (p.129)
The correct date and time has not been set. (p.29)
Make sure the video cable plug is connected all the way in. (p.128)
Set the video OUT format (NTSC/PAL) to the same video format as
the TV. (p.169)
Use the video cable that came with the camera. (p.128)
The built-in flash does not fire.
Image Review & Operation
The image cannot be erased.
The shooting date and time displayed is incorrect.
No image appears on the TV screen.
H73_10.fm Page 174 Monday, November 12, 2007 3:44 PM