Filter
Top Products
27
Preparing the Power Supply
Press the BATT. INFO button to display the remaining battery level indicator
(displays for 5 seconds). Depending on the battery life, the battery information
may not be displayed.
NOTES
• The first time you use a battery pack, fully charge it and then use the
camera until the battery pack is completely exhausted. Doing so will ensure that the remaining recording time
will be displayed accurately.
• Repeatedly charging and discharging the battery pack will eventually shorten its battery life. You can check the
battery life on the [Battery/Hour Meter] status screen (A 182) or the battery information screen (press the
BATT. INFO button while the camera is turned off). Fully charging the battery pack and then discharging it will
give you a more accurate reading.
• USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
Using a Household Power Outlet
You can also power the camera directly from a power
outlet using the supplied CA-940 Compact Power
Adapter and DC-940 DC Cable.
1 Set the Q switch to OFF.
2 Connect the DC cable to the DC IN terminal on the
camera.
3 Connect the power cord to the compact power
adapter and plug it into a power outlet.
4 Connect the DC cable to the compact power adapter.
• You can use the supplied cable tie to secure the
cable and prevent the plug from being accidentally
disconnected.
IMPORTANT
• Turn off the camera before connecting or disconnecting the compact power adapter.
NOTES
• When using the camera with a household power outlet, you can change the battery pack while the power is
on.
DC IN
terminal
COPY