Filter
Top Products
13
Handling Precautions
LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there might be a few dead
pixels among the remaining 0.01% or less pixels. Dead pixels displaying
only black or red, etc., are not a malfunction. They do not affect the images
recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporarily and will disappear when the camera is left unused for a few
days.
Cards
Cards are precision devices. Do not drop the card or subject it to vibration.
Doing so could damage the images recorded on them.
Do not store or use the card near anything having a strong magnetic field
such as a TV set, speakers, or magnet. Also avoid places prone to having
static electricity. Otherwise, the images recorded on the card might be lost.
Do not leave the card in direct sunlight or near a heat source. Doing so can
warp the cards and make them unusable.
Do not spill any liquid onto the card.
Always store your cards in a case to protect the data stored on them.
Do not bend the card or subject it to any excessive force or physical shock.
Do not store the card in hot, dusty, or humid locations.
Lens Electrical Contacts
After detaching the lens from the camera, attach the lens
caps or put down the lens with the rear end up to avoid
scratching the lens surface and electrical contacts.
Cautions During Prolonged Use
When you shoot continuously for a prolonged period or use
Live View shooting for a long period, the camera may become
hot. Although this is not a malfunction, holding the hot camera
for a long period can cause slight skin burns.
About smear adhering to the front of the sensor
Besides dust entering the camera from outside, in rare cases lubricant from the
camera’s internal parts may adhere to the front of the sensor. In case visible
spots still remain after the automatic sensor cleaning, having the sensor cleaned
by a Canon Service Center is recommended.
Contacts
COPY