Filter
Top Products
136
You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.
To Release the FE Lock:
Operate a button other than the button or the control dial.
Locking the Flash Exposure Setting
(FE Lock)
Available Shooting Modes p. 300
1
Turn on the LCD monitor.
2
Press the button and select (flash on).
• If you are using an externally mounted flash, please refer to its
manual for setting instructions.
3
Aim the camera at the subject on which you
wish to lock the exposure.
4
Press and hold the shutter button halfway and
press the button.
• The flash will pre-fire and the exposure setting will be locked.
• will display in the LCD monitor.
5
Re-aim the camera to compose the shot as
desired and shoot.
The FE lock cannot be used when [Flash Mode] in the [Flash
Control] menu is set to [Manual].
COPY