Filter
Top Products
141
Various Shooting Methods
Switching between Metering Modes
Available Shooting Modes p. 300
Evaluative
Appropriate for standard shooting conditions,
including backlit scenes. The camera divides
images into several zones for metering. It
evaluates complex lighting conditions, such as the
position of the subject, the brightness, the direct
light, and the backlighting, and adjusts the settings
to the correct exposure for the main subject.
Center Weighted
Avg.
Averages the light metered from the entire frame,
but gives greater weight to the subject matter at the
center.
Spot AE Point
Meters the area within the spot AE point frame.
Use this mode when there is a large divergence in
brightness between the subject and surroundings.
Center
Locks the spot metering frame to the center of the
LCD monitor.
AF Point
Move the spot AE point to the same position as the
selected AF frame. Can be set only in [FlexiZone]
(p. 121).
1
Change the metering mode.
1. Press the button.
2. Turn the control dial to select the
metering mode.
• With each press of the button, the settings that can be
configured with the control dial in each shooting mode will
change as follows.
Shutter speed/Metering mode
Aperture value/Metering mode
Shutter speed/Aperture value/Metering mode
COPY