Filter
Top Products
237
Troubleshooting
Memory card is not
formatted correctly.
zFormat the memory card (pp. 16,
220).
zIf reformatting does not work, the
memory card logic circuits may be
damaged. Consult the nearest Canon
Customer Support Help Desk.
SD memory card or SDHC
memory card is write
protected.
zSlide the write protect tab upward
(p. 256).
Image Seen in Viewfinder vs. Recorded Image.
Usually the recorded
image contains more of
the scene than is seen in
the viewfinder.
zConfirm the actual image size with the
LCD monitor. Use the LCD monitor
when taking close-up shots (p. 74).
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
zConfirm the procedures in
“ appears” (p. 235).
AF-assist Beam is set to
[Off].
zIn dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate
it (p. 56). Take care not to obstruct the
AF-assist Beam with your hand when
used.
Subject is out of focal
range.
zShoot with the subject at the correct
focusing distance (p. 276).
zThe camera may be set to an
unintended function (such as macro or
manual focus). Cancel the setting.
The subject is hard to
focus on.
zUse the focus lock, AF lock or manual
focus to shoot (p. 128).
COPY