Filter
Top Products
Additional Information 157
Use the computer’s Safely Remove Hardware function to end the connection and disconnect
the USB cable before using the camcorder.
- To be able to write back scenes and to transfer music files to the camcorder, power the cam-
corder using the compact power adapter and only then connect it to the computer using the
supplied USB cable.
Error writing on the memory card. Data may be recovered if the memory card has not been
removed. Attempt recovering the data?
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing on the memory card. Select [Yes] to try
to recover the recordings. If you removed the memory card and used it with another device
after this happened, we recommend you select [No].
File name error
- The folder and file numbers have reached their maximum value. Set [Photo Number-
ing] to [Reset] and delete all the photos on the memory card ( 90) or initialize it ( 38).
Initialize only using the camcorder
- There is a problem with the file system that prevents accessing the selected memory. Initial-
ize the memory with this camcorder ( 38).
LCD Screen has been dimmed
-Hold
pressed for 2 seconds to restore the LCD screen to its previous brightness set-
ting.
May not be possible to record movies on this memory card
- You inserted a memory card without a Speed Class rating. Replace the memory card with one
rated Speed Class 2, 4, 6 or 10.
- You may not be able to record movies in FXP mode on a memory card without a Speed Class
rating.
Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of scenes (3,999 scenes); no fur-
ther scenes can be recorded or copied ( / only) onto the memory card. Delete
some scenes ( 53) to free some space.
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded in a different television system (PAL or SECAM). It
cannot played back with this camcorder.
Memory card cover is open
- After inserting a memory card, close the memory card slot cover ( 36).
Memory card is full
- The memory card is full. Delete some recordings ( 53, 90) to free some space or replace
the memory card.
DISP.
COPY