Filter
Top Products
104
Camera will not record.
SD memory card or
SDHC memory card is
write protected.
Slide the write protect tab of the SD
memory card or SDHC memory card
upward (p. 117).
Image is blurred or out of focus.
AF-assist Beam is set to
[Off].
In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to activate it
(p. 24). Take care not to obstruct the
AF-assist Beam with your hand when
used.
The camera moves when
the shutter button is
pressed.
Setting the self-timer to (2
seconds) delays the shutter release
for 2 seconds and allows the camera
to stop shaking, thus preventing a
blurred image (Basic Guide p. 18).
Even better results can be obtained
by placing the camera on a stable
surface or by using a tripod to shoot.
Subject is out of focal
range.
Shoot with the subject at the correct
shooting distance (p. 123).
The subject is hard to
focus on.
Use the focus lock or AF lock to
shoot (p. 45).