Filter
Top Products
142
If error messages appear on the LCD monitor, try one of the following
solutions.
No memory card
• The memory card is not installed in the correct direction. Install the memory card
in the correct direction (p. 16).
Card locked!
• The SD memory card or SDHC memory card’s write protect tab is set to “Lock”.
Unlock the write protect tab (p. 18).
Cannot record!
• You attempted to shoot an image without the a memory card, or with a memory
card installed incorrectly. Install the memory card in the correct direction when
shooting (p. 16).
Memory card error (p. 52)
• Contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
• There is not enough free space on the memory card to shoot (pp. 24, 55, 65, 79)
or edit images (pp. 114 – 119). Erase the images (pp. 29, 107) to open space for
new images, or insert an empty memory card (p. 16).
Change the battery pack. (p. 16)
No image.
• There are no images recorded on the memory card that can be displayed.
Protected! (p. 110)
Unidentified Image/Incompatible JPEG/Image too large./RAW
• Unsupported images or data, or corrupted image data cannot be displayed.
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot
register this image!/Cannot modify/Cannot assign to category
• Incompatible images cannot be magnified (p. 104), rotated (p. 114), edited
(pp. 114 – 119), registered to the start-up screen (p. 136), categorized (p. 112),
or added to a print list (p. 121).
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited,
registered to the start-up screen, categorized, or added to a print list.
• Movies cannot be magnified (p. 104), edited (pp. 114 – 119), or registered to the
start-up screen (p. 135).
List of Messages that Appear on the Screen