Filter
Top Products
86
You can automatically correct red eyes in images taken with the flash.
Select [Flash Settings].
● Press the n button, select [Flash
Settings] from the 4 tab and press the
m button.
Adjust the setting.
● Press the op buttons or turn the  dial
to select [Red-Eye Corr.] and press the
qr buttons to select [On].
Πwill appear on the screen.
When the camera detects that there is a possibility that people have their
eyes shut, appears.
Select [Blink Detection].
● Press the n button, select the 4
tab, and then select [Blink Detection]. Use
the qr buttons to select [On].
Shoot.
● When a person with shut eyes is detected,
a frame and appear for a few seconds.
ΠRed-Eye Correction
Red-eye correction may be applied to other red parts than red eyes. For
example, when red make-up has been used around eyes.
• You can correct recorded images (p. 119).
• If you press the r button as shown on the screen in Step 2 and then
press the
n button, the Flash Settings screen will display (p. 48).
Checking for Shut Eyes
In W, " and $ mode, the function is only available for the last image
shot.