Filter
Top Products
45 Maintenance Chapter 9
6 Press the empty ink tank’s tab (1),
then remove it from the slot (2).
7 Remove the new ink tank from its
packaging, then pull the orange tape
toward the arrow so that the
protective film does not remain on the
air hole (A). Then hold the ink tank as
shown and remove the orange
protective cap (B).
8 Insert the ink tank diagonally into the
print head.
9 If you need to replace another ink
tank, repeat steps 6 to 8.
10 Close the Inner Cover 2.
11 Close the Inner Cover 1.
12 Close the Scanning Unit.
(1)
(2)
(B)
(A)