Canon MV500 Camcorder User Manual


 
107
E
Additional
Information
AV/PHONES is not set to AV in the
menu ( 32).
•AV\ DV OUT (Analog-digital
converter) is not set to OFF in the
menu ( 83).
The video heads need cleaning
( 103).
The TV/VIDEO selector on the TV
isn’t set to VIDEO ( 33-35).
The speaker has been turned off with
the selector dial ( 31).
Headphones are being used.
? There’s no picture on the TV
screen.
? There’s no picture on the TV
screen, even though the tape is
moving.
? There’s no sound coming from the
speaker during playback.
Miscellaneous
Cause and/or what to do about it
The remote sensor mode is set to
OFFB in the menu ( 44).
The remote sensor modes of the
wireless controller and the camcorder
itself are different ( 44).
The batteries are dead or not inserted.
Check the screen displays ( 111).
External interference may cause the
camcorder’s microprocessor to
malfunction temporarily. If random
letters appear in the display or if
normal operation is interrupted,
remove and then replace the power
source.
Remove the cable and then reconnect
it or turn the power off and back on
again.
This is not a malfunction.
Problem
? The wireless controller doesn’t
work.
? The power indicator is flashing.
? The camcorder malfunctions.
? The DV cable is connected
correctly, but there’s nothing in
the display.
? The camcorder becomes warm
during use.
#5_ MV500/MV500i__E(96-121) 2/6/02 14:19 Page 107