Canon MV500 Camcorder User Manual


 
20
E
Mastering
the Basics
You can record and play back a tape in SP (standard play) and LP (long play)
modes. LP extends tape usage by 1.5 times.
REC MODE••••SP
VCR SET UP
( 39)
You can’t add sound (audio dubbing) or images (AV insert) to a tape that has
been recorded in a mode other than SP mode. If you plan to use either of these
functions later, record in SP mode.
Changing the recording mode
To change to LP mode, open the menu and select VCR SET UP. Then
select REC MODE, set it to LP and close the menu.
Notes:
When recording and playing back tapes in LP mode, the nature of the tape and
usage conditions may affect recording, mosaic-like noise may appear in the
image and the sound may be distorted during playback. For important
recordings, therefore, set the camcorder to SP mode.
We recommend recording in SP mode when you plan to transfer images taken
with the camcorder to your PC.
If you record in both modes on the same tape, the picture may become distorted
during playback and the time code may not be written correctly.
A tape recorded in LP mode on other digital equipment may produce the
mosaic-like noise and the sound may become distorted when playing back on
this camcorder.
A tape recorded in LP mode on this camcorder may produce the mosaic-like
noise and the sound may become distorted when playing back on other digital
equipment.
,
MV500i
PLAY
(VCR)
CAMERA
#2_MV500/MV500i__E(07-37) 2/6/02 14:16 Page 20