Filter
Top Products
96
Recording a Still Image on a Memory Card While
Recording Movies on a Tape
When you are recording a movie on a tape, you can record the same picture as a still
image on the memory card. Select the image quality from normal or fine.
1. Open the menu and select [CAMERA SETUP]. Select [STILL I.REC], set
it to [ FINE] or [ NORMAL] and close the menu.
2. While you are recording a movie, press the PHOTO button.
The size of the still image will be 640 x 480.
The quality of the still image is slightly lower than a still image recorded in
CARD CAMERA mode.
The still image cannot be recorded on a memory card when a fader, effect or
the multi-image screen is activated.
The still image cannot be recorded on a memory card when the widescreen
mode is selected.
“ ” appears when you press the PHOTO button when [STILL I.REC] is set
to [OFF].
Recording from a Tape in the Camcorder
1. Play back the tape.
2. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other
information appear.
• When you press the PHOTO button on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The card access indicator flashes.
• You can also record a still image by pressing the PHOTO button fully when the tape
is in playback pause mode.
CAMERA
PLAY (VCR) CARD CAMERA CARD PLAY
MENU
(37)
CAMERA SETUP STILL I.REC
••
OFF
CAMERA
PLAY (VCR)
CARD CAMERA CARD PLAY