Filter
Top Products
AXIS 2110 User’s Manual Configuring Your Camera
27
System Security
To prevent unauthorized use, the AXIS 2110 supports multi-user password protection
and access is restricted to defined users only
. The system Administrator(s) has exclusive
access to the camera’s Administration Tools and can determine the registration, and access
rights for all users.
User Access Rights
As an Administrator, click System and then Users to perform any of the following tasks:
• define or edit the administrator (root) password
• define, add and delete user names and passwords
• assign individual access rights to a selected user, where each user is given one or all of the fol-
lowing levels of access:
- Admin: a user granted Admin rights has exclusive access to the camera’s Administration
Tools and can consequently determine the registration of all users.
- Dial-in: provides the user with dial-in modem access to the AXIS 2110 only.
- View: provides the lowest level of access, which allows the user to view the images only.
Adding at least one such user will disallow anonymous users.
Important!
Wizards Description
Installation
Wizard
The Installation Wizard guides you through the settings for: Security (users and passwords), Date and Time,
Images, The Focus Assistant and the settings for Network or Modem connection. These settings can also be made
individually in the tools described above.
Application
Wizard
The Application Wizard helps you set up applications for uploading images to a designated destination, Using this
Wizard you can; configure images to upload continuously or only when an event occurs, configure the alarm
buffer, set the image frequency, set the times for uploading images, send the images to an ftp-server or via e-mail,
etc.
Support & Help Description
Support General help, view the Release Notes, view the Parameters and Log File, etc. From here you can also restart the
unit and/or reinstate the default factory settings, should this become necessary.
Help Opens the on-line help function.
Home Links directly to the Home Page of your application.
• The Administrator’s default username and password (set to root and pass) can be used for logging in
to the unit for the first time, but the default password must be changed to enable the camera’s secu-
rity functions. All Axis products are shipped with the same password as default.
• By default, the AXIS 2110 is set for anonymous user access, which means that anybody on the Inter-
net/intranet can view the video images from a Web browser. To restrict open access, simply register
a single authorized user with viewing rights. This effectively revokes the anonymous user service and
restricts camera access to specified users. If the anonymous user service is satisfactory for your
application, simply do not add any other users.