Filter
Top Products
AXIS 2110 User’s Manual Choosing Your Application
31
Viewing Images in a Custom-designed Web Page
Simply install the AXIS 2110 directly on your local Ethernet network and complete the
Installation Wizard to immediately view live video images in your own custom-designed
Web page. The Wizard not only helps you define the image format and personalized
characteristics of your Web page Layout, but even allows you to decide how accessible
your product is over the intranet or Internet - you decide in just a few simple steps:
Often used as a Web attraction for enhancing a Web site with live images, this typical
application represents the most basic form of network camera configuration. It is ideally
suited for occasionally-visited sites on both large corporate networks, and SOHO
(Small-Office Home-Office) applications where a small network is installed and
maintained. If you anticipate a larger audience for your images, you should consider
configuring your product to upload images to an FTP server on your network, as described
inSequentially Uploading Images to a Remote FTP Server, on page 32.
Installation and Configuration Overview
Configure your AXIS 2110 for viewing images over a network as follows:
Note: You can refine your application using the Web-based Administration Tools.
1. Connect the AXIS 2110 to your local network. Refer to Installing Your Camera on a Network, on page 10.
2. Open the Home Page in your browser and start the Installation Wizard. Complete the Wizard to establish the standard
Security, Date and Time, Image General Layout and TCP/IP Network settings - selecting Network as your chosen method of
connection in the Modem or Network dialog. Refer to Configuring Your Camera, on page 23.
3. Your application is now complete. Having completed the Wizard, you should now verify the installation by checking that you
have full access to both the images and the camera’s Web pages in your browser.
AXIS 2110
LAN/WAN
Intranet Network
Browser
Browser