Filter
Top Products
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
COPYRIGHT
©
1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
7-14
Figure 7-312
Figure 7-313
[6]
[6]
[7]
Pickup
gear unit
Figure 7-311
[5]
5) Remove the two screws [5] from the
screw plate found at the bottom of the ma-
chine.
6) While freeing the five claws [6], detach
the front lower cover [7].
Caution:
When mounting the multifeeder unit, be
sure to perform the following first:
1) Turn on the power switch; then, se-
lect the multifeeder as the source of
paper, and press the Copy Start key.
2) When the pickup gear unit assembly
has moved to its upper limit, turn off
the power switch.
3) Mount the multifeeder, and make one
copy using it as the source of paper.