Filter
Top Products
75
Playback/Erasing
You can play back images on a television with the supplied AV
cable.
Viewing Images on a TV set
1
Turn off the camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
zOpen the terminal cover by slipping a
fingernail under the right edge and
plug the AV cable in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
zThe video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 23). The
default setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
zYou can also use the TV as the display in the shooting
mode.
VIDEO
AUDIO
Yellow
Black