Filter
Top Products
86
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
z
Confirm the procedures in
“ appears” (p. 84).
AF-assist Beam is set to
[Off].
zIn dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to
activate it (p. 21). Take care not to
obstruct the AF-assist Beam with
your hand when used.
Subject is out of focal range.zShoot with the subject at the
correct focusing distance (p. 112).
The subject is hard to focus
on.
zUse the focus lock, AF lock or
manual focus to shoot (p. 45).
Subject in recorded image is too dark.
Insufficient light for shooting.zSet the flash to (Flash on)
(Basic Guide p. 12).
The subject is
underexposed because the
surroundings are too bright.
zSet the exposure compensation to
a positive (+) setting (p. 49).
zUse the spot metering functions
(p. 48).
Subject is too far away for
flash to reach.
zShoot within correct flash range of
the subject when using the built-in
flash (p. 113).
zRaise the ISO speed and then
shoot (p. 53).
Subject in recorded image is too bright, or
image flashes white.
Subject is too close, making
the flash too strong.
zShoot within correct flash range of
the subject when using the built-in
flash (p. 113).
zTurn [On] the Safety FE (p. 56).