Filter
Top Products
95
Shooting
4
Shoot the image.
When you press the shutter button halfway, a number
indicating the difference between the standard exposure*
and the selected exposure appears on the LCD monitor. If
the difference is more than ±2 stops, “-2” or “+2” appears in
red.
* The standard exposure is calculated by the AE function
according to the selected metering mode.
• For functions available in this mode, see page 212.
• If you wish to change the exposure, select the shutter
speed or the aperture with the button and change
the value using the left or right button.
• The LCD monitor’s brightness matches the selected
shutter speed and aperture value. When you select a
fast shutter speed or shoot a subject in a dark place and
set the flash to
(Flash on with red-eye reduction)
or
(Flash on) the LCD monitor will always brighten.
• When the flash is on, the output of the flash can be
adjusted.
• For the correlation between aperture value and shutter
speed, see page 90.