Filter
Top Products
26
Preparing the Camera
zA slow shutter speed has likely been selected
because of insufficient lighting if the upper
indicator blinks orange after the metering
preparations are complete and the camera shake
icon ( ) displays in the LCD monitor. Set the
flash to or , or affix the camera to a tripod
to shoot.
zAfter you shoot an image by fully pressing the
shutter button, the image displays on the LCD
monitor for approximately three seconds (if the
review duration is changed, the image is
displayed for the selected number of seconds; or
if the hold function is activated, the image is
displayed until the shutter button is pressed
again) (p. 36). Keeping the shutter button fully
pressed after shooting, or pressing the SET
button while the image is displayed will also
continue to display the image.