Filter
Top Products
89
Shooting – Advanced Functions
Advanced Functions
Adjusting the Flash Output
In M mode, the flash output can be controlled
in three steps when shooting.
1
Select (Flash
Output) in the
FUNC. menu.
z See Selecting Menus and
Settings (p. 66).
2
Adjust the flash output using the
or button.
z A shot can be taken immediately by pressing
the shutter button. The menu will reappear
after the shot, allowing you to adjust the
settings easily.
3
Press the FUNC. button.
Mode Dial
When the flash output is low, less shadow
appears in the image. However, when
shooting a wide scene or area, the image will
likely be darker due to insufficient light. When
adjusting the flash output, consider all the
shooting conditions, including the distance to
the subject.