Filter
Top Products
126 Printing with Bubble Jet Printer (Optional)
Printing (continued)
Trimming (Printing a Portion of an Image)
You can specify which portion of an image gets printed.
Prior to Trimming
Please set the Print Style (Paper, Borders and Date) first before setting the trimming
settings (p. 124).
1
In Replaying mode, press and
choose [Trimming] using C or D on the
multicontroller and press again.
• The trimming frame appears at the center of the
image. If a trimming setting has already been
selected for the image, the frame will appear
around the previously selected portion.
2
Trim the Image.
Changing the Size of the Trimming Frame
• Move the zoom lever toward
or .
• The trimming frame can be changed to a
minimum selection of approximately half the
displayed image or a maximum selection that is
virtually the same size as the image.
• You can cancel the trimming setting by moving the zoom lever toward
again when the trimming frame is already set to the maximum size.
Setting the Portion of the Trimming Frame
• Move the trimming frame using C, D, B or A on the multicontroller.
Rotating the Trimming Frame
• You can rotate the trimming frame by pressing the
button.