Canon PowerShot S40 Digital Camera User Manual


 
Replaying 93
Magnifying Images
In single image replay, the displayed image can be shown magnified by an
approximate factor of 2.5 or 5 for PowerShot S30 and 3 or 6 for PowerShot S40.
1
Slide the power/replay lever to the right.
2
Slide the zoom lever toward .
The display cycles to the next magnification mode each time you slide the
zoom lever toward
.
You can move around the magnified image using B, A, C or D on the
multicontroller.
Reducing the size of the enlarged image until it displays in its original size
1
Slide the zoom lever toward .
The most magnified image is reduced to 2.5 times the original size for
PowerShot S30 and 3 times the original size for PowerShot S40 by sliding
the zoom lever toward
. Sliding the zoom lever toward again reduces
the image to its original size.
Magnified
approximately 3 times
(PowerShot S40)
Approximate
position
Movie frames and index replayed images cannot be magnified.
If the camera is protected by Digital Camera Waterproof Case WP-DC300, you
cannot move the magnified area using C or D on the multicontroller.
You can magnify an image while it is displayed on the LCD monitor in Shooting
mode immediately after the image is shot (p. 46).
Magnified
approximately 6 times
(PowerShot S40)
Approximate
position