Canon PowerShot S45 Digital Camera User Manual


 
113
Replaying, Erasing
Attaching Sound Annotations to Images
In replay mode (including single replay, index replay, magnifying replay and the replay
immediately after shooting in Shooting mode) you can attach sound annotations (up to
60 seconds) to an image. The sound data is saved in WAVE format.
1
Press the button while replaying images.
The A / V panel appears.
2
Select (Record) using B or A on the
multicontroller, then press .
The recording starts and the elapsed time is displayed.
Speak towards the microphone of the camera.
To stop recording, press
. To restart recording,
press
again.
You can add as many sound annotations as you
like until their total time reaches 60 seconds.
Playing back the Sound Annotations
Select (Replay) in step 2 above. Images with sound annotations are displayed
with the
mark (simple display or detailed display). To start playback, press . To
stop playback, press again. You can adjust the volume using C or D on the
multicontroller.
Erasing the Sound Annotations
Select (Erase) in step 2 above.
You cannot attach sound annotation to movies.
You cannot record or playback sound notes for images that already have an
incompatible sound file attached. If you attempt to record or play an image with
the
icon, the Unidentified sound file message will display. Incompatible
sound files can be deleted with this camera.
Sound annotations for protected images cannot be erased. (p. 119).
The volume can be adjusted in the Setup menu (p. 152).