Filter
Top Products
114
Automated Playback (Slide Show)
Starting a Slide Show
Slide show image settings are based on DPOF standards (p. 122).
1
In the [ (Replay)] menu, select [Slide
Show] and press .
• See Selecting Menus and Settings (p. 36).
2
Select [Program] using C or D on the
multicontroller. Then select between [All
Images] or one of [Show 1]-[Show 3] using
B or A on the multicontroller.
3
Select [Start] using C or D on the
multicontroller and press .
• The slide show will start and automatically stop when the show is done.
Pausing and Resuming a Slide Show
• Press
to pause the show. Press it again to resume.
Fast Forward / Rewinding a Slide Show
• Use B or A on the multicontroller to move to the previous or next image.
Stopping a Slide Show
• Press the
button during a slide show to stop it and display the slide
show menu.
4
When the slide show is over, press the button.
• The slide show menu appears again. Press the button again to close
the menu.
• Movie images play for the length of time that they were recorded regardless of the
time set in the slide show settings.
•
The power-saving function is disabled while a slide show plays on the camera (p. 25).
All Images Plays all the images on the CF card in order
Slide Show 1 - 3 Plays the images selected for each show in order (p. 115)