Filter
Top Products
Indexer System Guide October 2004
© As-Built Solutions Ltd Page
2
1.2 Power
The unit requires a good quality alkaline PP3 battery to be fitted. Unscrewing the black thumbscrew at the
base of the cover plate accesses the battery compartment. Take care to connect the battery with the correct
po
larity.
The battery will last for a typical working day. It should be removed if the unit is not to be used for a long
period of time to avoid potential damage if it should leak.
If the LED on the unit or remote control flashes rapidly after a scan it indicates that the battery is running
low and should be replaced as soon as possible.
The unit should not be connected to an AC adapter or other alternative power source.