Filter
Top Products
21
2 Connecting the camera to a computer.
1. Use the supplied interface cable to connect the computer's USB
port to the camera's DIGITAL terminal.
With your fingernail on the upper edge of the camera's DIGITAL terminal
cover, pull it forward to open it, and plug the interface cable in all the way.
When the power is turned on automatically, the camera and computer
will be able to communicate. (The LCD monitor or viewfinder turns off,
and the power/mode indicator lights yellow.)
Always grasp the connector's sides to remove the interface cable
from the camera's DIGITAL terminal.
If the "Digital Signature Not Found" window appears, click [Yes]. The USB
driver will automatically finish installing onto the computer when you attach
the camera and open a connection.
USB Port
DIGITAL Terminal
Interface Cable Terminal Cover
Power/Mode Indicator
Downloading Images to a Computer