Filter
Top Products
7
Shooting
Reviewing an Image Right After Shooting
After a shot is taken, the image appears in the LCD monitor for
approximately 2 seconds.
To override this time limit and continue displaying the image, use one of
the following methods:
z
Keep the shutter button fully depressed after taking the shot.
z
Press the SET or DISP. button while the image is displayed in the LCD
monitor.*
Press the shutter button halfway again to stop displaying it.
* This operation is not available in the Stitch Assist mode (p. 8).
Shooting (Movies)
No matter what position the mode dial is in, you can shoot movies with
just a push of the movie button.
z
Max. Clip Size: 1 GB*
z
Sound is recorded in stereo.
z
Pressing the Movie button again stops
recording.
* Even before the recording size reaches
1 GB, recording will stop at the moment the
recording time reaches 1 hour. Depending
on the storage capacity of the memory card
and the speed at which the data is written,
recording may stop before reaching 1 GB or
1 hour.
Î
See the Advanced Guide: Changing the Review Duration (p. 29)
Î
See Erasing (p. 14)
You can perform the following while an image is displayed (not available
in Stitch Assist mode).
z Display the image's information (Advanced Guide: p. 22).
z Display the magnified image (Advanced Guide: p. 92).
z Erase individual images (Basic Guide: p. 14).
z Attach sound memos (Advanced Guide: p. 102).
Î
See the Advanced Guide: Shooting a Movie (p. 46)
Movie button