Filter
Top Products
Using Fully Automatic Wireless Flash
Flash exposure compensation and other settings set with the master unit will
also be automatically set
in
the slave units. Thus, you need not make settings
on the slave unit(s). Wireless flash with the following settings can be done
in
the same way as with normal flash shooting.
• Flash exposure compensation
• High-speed sync (FP flash)
•
FE
lock
• FEB
• Manual flash
• Stroboscopic flash
[J]
With
FE
lock, if even one Speedlite will result
in
underexposure, the
<~
> icon will blink
in
the viewfinder. Open the aperture more or move the slave unit closer to the subject.
Setting Communication Channel
If there
is
another Canon wireless flash system nearby, you can change the
channel
No.
to prevent signal confusion. Both the master and slave units must
be set to the same channel
No.
Press the
<ZOOM/~>
button so
that
<~>
blinks.
Set the channel No.
Turn the
<@>
dial to select the channel
number, then press the
<(!»
button.
mJ
Zoom 2
37