Canon SD4500 IS Digital Camera User Manual


 
Safety Precautions
11
Use only the recommended battery.
Do not place the battery near or in direct flame.
Unplug the power cord periodically and wipe away any dust and dirt that has
collected on the plug, the exterior of the power outlet, and the surrounding area.
Do not handle the power cord with wet hands.
Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
Do not allow dirt or metal objects (such as pins or keys) to contact the terminals
or plug.
The battery may explode or leak, resulting in electrical shock or fire. This could
cause injury and damage the surroundings. In the event that a battery leaks and
the battery acid contacts eyes, mouth, skin or clothing, immediately flush with
water.
Caution
Denotes the possibility of injury.
Be careful not to bang the camera or subject it to strong impacts or shocks when
hanging it by the strap.
Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
When using the flash, be careful not to cover it with your fingers or clothing.
This could result in burns or damage to the flash.
Avoid using, placing or storing the product in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas.
These could cause leakage, overheating or an explosion of the battery, resulting in
electrical shock, fire, burns or other injuries.
High temperatures may cause deformation of the camera or battery charger
casing.
The slideshow transition effects may cause discomfort when viewed for
prolonged periods.
COPY