Canon SX120 IS Digital Camera User Manual


 
89
You can manually set the shutter speed and aperture to shoot images.
D stands for “Manual”.
Set the mode dial to D.
Make the setting.
Press the b button to choose the shutter
speed or aperture value.
Turn the
Â
dial to set a value.
XThe set exposure level appears on the
indicator. You can check the difference
against the standard exposure level.
XWhen the difference is more than ±2
stops, the set exposure level appears in
orange. When you press the shutter
button halfway, “–2” or “+2” appears in
orange.
Setting the Shutter Speed and Aperture
Value
Shutter Speed
Aperture
Value
Exposure Level Indicator
Standard
Exposure Level
Exposure Level
The standard exposure is calculated according to the metering method
chosen (p. 82).
If you use the zoom after making settings or change the composition, the
exposure level may change.
Depending on the shutter speed or aperture value set, the monitor
brightness may change. If the flash is raised and set to h, the monitor
brightness will not change.
If you press the b button while holding down the shutter button halfway,
the shutter speed or aperture value (whichever is not currently chosen)
will automatically adjust to obtain the correct exposure (the correct
exposure may not be obtained depending on the settings).
COPY