Canon SX120 IS Digital Camera User Manual


 
93
In D mode, you can choose 3 levels of flash output.
Set the camera to D mode (p. 89).
Choose the flash output.
After pressing the m button, press the
op buttons to choose ~.
Make the setting.
Press the qr buttons or turn the  dial
to choose an option, then press the m
button.
Adjusting the Flash Output
To set the flash output, choose [Flash Settings] (p. 91) from the 4 tab,
then choose [Flash Output] and press the qr buttons to choose a
setting (p. 48).
In M and B modes, you can set the flash output if you choose the 4
tab, then [Flash Settings] and set the [Flash Mode] option to [Manual].
COPY