Filter
Top Products
5-18
Using the Viewer for Java to Distribute Videos
When a startup screen is specified in the “open_image” parameter, this parameter
specifies the display time. The time is specified in milliseconds (1/1000 sec.), and
the default value is 0. The image is displayed until the first video frame appears.
Values from 0 to 30000 (30 seconds) can be specified.
Yesopen_image_time
Specifies the color of the character string specified for “comment” and “hostname”.
The color is specified at “#RRGGBB”. The default is yellow.
Yes
overlay_font_color
This function specifies whether the Snapshot button is displayed. Specify “on” or
“off”. The default value is “on”. The button is always displayed unless “off” is explicitly
specified.
Yesshow_capture
This function displays the comment as an overlay on the video image. Specify “on”
or “off”. The default value is “off”. Note that this parameter is only valid if the
“comment” parameter is specified.
Yes
show_comment
This function displays the frame count as an overlay on the video image. Specify
“on” or “off”. The default value is “off”.
Yesshow_counter
This function displays the frame rate as an overlay on the video image. Specify “on”
or “off”. The default value is “off”.
Yesshow_fps
This function displays the host name as an overlay on the video image. Specify “on”
or “off”. The default value is “off”. Note that this parameter is only valid if the
“hostname” parameter is specified.
Yesshow_hostname
Specifies whether or not the WebView Livescope logo should appear in the upper right
of the screen. It appears if show_logo is “on” and does not appear if it is “off”.
Yesshow_logo
Function for displaying the buttons to change the image size when LiveApplet is
running. Specify “on” or “off”. The default value is “off”.
Yesshow_toolbar
Specify whether or not to display the panorama window pop-up button.
Yesshow_panobutton
This function displays a bitmap image as an overlay on the video image. Specify the
image using the “bitmap-filename,x,y” format. Use the GIF format for bitmap images
(transparent GIFs supported). The “x,y” parameters specify the coordinates of the
bitmap image position on the video frame. If “x,y” is omitted, the image is displayed
in the center of the video frame.
Yessuperimpose
Specifies the character string that is displayed when connection to the camera
server fails because the limit on the number of connections was exceeded. The
default is “too many clients”.
Yestoo_many_msg
Specify the URL of the HTTP server for applet access. Specify the IP address and
port number that match those specified in the codebase attribute.
Nourl
This parameter specifies the video image display size (in pixels). Specify the width. The
display sizes are 80 to 640, and any value can be set as the width. The height is calculated
as 3/4 of the specified width. E.G. video_width=“240” (height = 240 × 3/4 = 180.)
Yesvideo_width
Specifies the display position of the picture file specified at bg_image. With the upper
left coordinates of the picture at “0,0” and the right direction given as x and the down
direction as y, image_offset is specified as “x,y”. The default is “335,0”.
Yesimage_offset
Specifies the character string to be displayed following applet startup when
auto_connect is “off”. The default is “no connection”.
Yesno_connect_msg
You can use this parameter to specify the screen that appears in the video display
window until the first video image appears. Specify the name of a JPEG or GIF image.
If this parameter is omitted, the default startup screen is displayed.
Yesopen_image
Description
Omissible
Parameter Name
Specifies whether the panorama window should be pop-up displayed or embedded
in the page. Specify “embed” for making it an embedded display. When specifying
“embed”, the Width and Height of the applet tags must be specified a little larger
(E.G. width=500; height=660).
Yesgui_type
This parameter specifies the host name displayed in the applet. This value is used
as the host name in messages displayed during connection, etc. If this parameter is
omitted, no host name is displayed.
Yeshostname