Filter
Top Products
254
Trouble?
- Wi-Fi networks with a stealth function that do not broadcast their
network name (SSID) will not be detected by the camcorder during
the Wi-Fi network setup. Perform the setup manually (A 206) or
turn off the stealth function of the access point.
Wireless playback on a computer or similar device is not smooth.
-Playback may not be smooth depending on the access point’s set-
tings and capabilities. Try using the camcorder closer to the access
point and remove any obstructing objects or obstacles between
them.
- Connect the computer to the access point using a LAN cable.
-Turn off the wireless functions of nearby wireless devices other than
the computer or similar device being used for playback.
- Switch the wireless access point to IEEE 802.11n. Refer to its
instruction manual for details.
-If these do not solve the issue, the cause m
ay
be due the device or
conditions unique to the surrounding area. Use the supplied High
Speed HDMI cable to connect the camcorder to a TV (A 151).
The wireless connection was interrupted while transferring files.
- Incomplete files may remain at the transfer destination. If incom-
plete files remain at the transfer destination, check the content and
make sure they are safe to delete before deleting them.
- Select [New Files] and perform the file transfer again.
Cannot complete a wireless connection to the camcorder.
-Resetting the camcorder’s settings using 1 > q > [Reset
All] will reset the camcorder’s SSID (network name) and change the
network passwords. Erase the camcorder’s previous network set-
tings from the iOS or Android device and connect the device to the
camcorder again.