Filter
Top Products
261
Trouble?
LCD Screen has been dimmed Use the [LCD Backlight] setting to
change the brightness
- Change the 1 > t > [LCD Backlight] setting to [Normal] or
[Bright].
May not be possible to record movies on this memory card
- You may not be able to record movies on a memory card without a
CLASS rating or with one rated CLASS 2. Replace the memory
card with one rated CLASS 4, 6 or 10.
D Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of
AVCHD scenes (3,999 scenes); no further scenes can be copied
onto the memory card. Delete some scenes (A 73) to free some
space.
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded using a video config-
uration that is not supported (PAL or SECAM). Play back the
recordings in the memory card with the device originally used to
record them.
Memory card cover is open
-After inserting a memory card, close the memory card slot cover.
Memory card is full
- Delete some recordings (A 73) to free some
space or replace the
memory card.
Memory card is write-protected
-The LOCK switch on the memory card is set to prevent accidental
erasure. Change the position of the LOCK switch.