Filter
Top Products
90
PLAYBACK
■ To cancel manual trapezoid correction
1.
In the PLAY mode, display the corrected
image for which you want to cancel trapezoid
correction.
2.
Press [MENU].
3.
On the “PLAY” tab, select “Keystone”, and
then press [̈].
4.
Press [SET].
Saving the Corrected Version of an Image
You can use the following procedure to save the trapezoid
corrected version of an image (indicated by the icon on
the display) to a separate file.
1.
In the PLAY mode, display the corrected
image you want to save.
2.
Press [MENU].
3.
On the “PLAY” tab, select “Copy”, and then
press [̈].
4.
Use [̆] and [̄] to select “Save Corrected”,
and then press [SET].
• This performs trapezoid correction on the data of the
original file. The correction process takes about 10
seconds.
• After the data correction procedure is complete, the
camera saves the corrected image as a separate file.