Filter
Top Products
143
PLAYBACK
AV cable
[AV OUT] (AV output port)
Video input terminal
TV
2.
Turn off the camera.
3.
Set the camera onto the USB cradle.
4.
Turn on the TV and select its video input
mode.
5.
Press [ ] to turn on the camera, and then
perform the required operation for playback.
IMPORTANT!
• Make sure that “Power On” or “Power On/Off” is
selected for the camera’s power on/off functions
(page 161) when you connect to a TV to view
images.
• All icons and indicators that appear on the monitor
screen also appear on the TV screen.
• Note that the audio output is monaural.
• The camera’s monitor screen will go blank during
video output.
• Pressing the USB cradle’s [PHOTO] button will
activate the Photo Stand feature (page 136) and
display images on the TV screen.
• Depending on the size of the TV screen, recorded
images may not fill the entire screen.
• For video output, the audio volume level is initially
set to maximum. Perform volume level adjustment
using TV controls.
• After using an optionally available AV cable (EMC-
2A) to connect the camera’s USB cradle connector
directly to the AUDIO IN terminal of a TV, you can
view recorded images on the TV and even use the
TV screen to compose images before recording
them.
B