Filter
Top Products
100
Other Settings (Set Up)
Procedure
[SET] * MENU * “Set Up” Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the
PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During “O Tracking”
– During Voice Recording playback or recording
– During movie recording and playback
Procedure
[SET] * MENU * “Set Up” Tab * REC
• With “Power On/Off”, the camera turns off when you press [r] (REC) in the REC
mode.
• When “Power On” or “Power On/Off” is enabled, you can turn on the camera by
holding down [
r] (REC) until the back lamp lights green momentarily.
Configuring Auto Power Settings (Auto Power Off)
Configuring [r] Setting (REC)
Power On Camera turns on whenever [r] (REC) is pressed.
Power On/Off Camera turns on or off whenever [r] (REC) is pressed.
Disable
Camera does not turn on or off whenever [
r] (REC) is
pressed.