Filter
Top Products
41
Snapshot Tutorial
. Using the easy Menu
The easy menu contains flash, self-timer, and image size settings, plus an item for
exiting the easy mode.
While the camera is in the easy mode, all the other settings (besides Flash, Self-
timer, Image Size, and easy Mode) on the REC tab menu (page 150) and Quality tab
menu (page 151) are fixed at preset optimum values. Any settings you configured on
these tabs are not used in the easy mode.
IMPORTANT!
• To use the Set Up tab menu (page 151), you need to exit the easy mode. To do
this, select the “easy Mode” item in step 2 of the following procedure, and then
select l in step 3. After that, you can use the Setup tab menu as you normally
do.
1. Press [MENU].
The easy menu displays larger text than standard
menus.
2. Use [8] and [2] to select the menu item you
want, and then press [SET].
3. Use [8] and [2] to select the setting you want, and then press [SET].
• An asterisk (*) indicates reset default settings.
• See the following for details.
– Flash (page 26)
– Self-timer (page 63)
– Image Size (page 24)
• The following are the settings you can select for “easy Mode”.
• On-screen pop-up help text provides a brief explanation of each setting.
Menu Item: Available Settings:
Flash > (Auto Flash)* / < (Flash On) / ? (Flash Off)
Self-timer • (10-second self-timer) / l*
Image Size (* / $ / !
easy Mode k / l*
Exit Menu Exit the easy menu
To do this: Select this setting:
Stay in the easy mode, without switching to another
recording type
k
Switch from the easy mode to a standard recording type l
B