Filter
Top Products
25
Quick Start Basics
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of an SD, SDHC, or SDXC memory card, formatting on a
computer can result in non-conformity with the SD format, causing problems with
compatibility, operation, etc.
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
Manager install files to your computer. Do this before formatting the card.
• Before formatting an Eye-Fi card, be sure to back up any data on it that you want to
keep.
. To turn on the camera
• Take care to ensure that nothing is restricting or coming into contact with the lens
as it extends. Holding the lens with your hand so it cannot extend creates the risk
of malfunction.
Turning Power On and Off
To turn on power
and enter the REC
mode
Press [ON/OFF] (Power).
• The back lamp will light green momentarily and the lens will
extend out of the camera (page 29).
To turn on power
and enter the
PLAY mode
Press [p] (PLAY).
• The back lamp will light green momentarily and an image
currently stored in camera memory will appear on the monitor
screen (page 32).
[ON/OFF] (Power)
Back lamp
Tab
“f” (PLAY) / “g” (REC)
[p] (PLAY)